Operation

LIQUISAFE is designed to be easy to operate without any lifting or awkward handling. To provide a more detailed description of use the following operating sequence is an extract from the operating manual:

1. Ensure extract ventilation system is connected and turned on.
2. Position transfer assembly unit adjacent to container aperture cap using lower radial handle with one hand and vertical lifting handle in the parked position with the other hand.
3. Remove cap from container.
4. Locate unit over container aperture by use of two hands on radial handle.
5. Hold radial handle with right hand and open lower ball valve with left hand, 90º movement of valve handle is towards operator to open.
6. Using two hands on the lifting handle, lower filling/extraction tube into container.
7. Activate liquid transfer system by turning on vacuum/pressure pump or opening top fill valve.  Valve is open when valve lever is in line with the supply line.
8. At the end of the transfer process, close top fill valve and raise filling/extraction tube fully up to the stop position using two hands.  On reaching the stop position, lower handle into parking cup situated on the radial handle.  Allow transfer tube to drain as long as possible.
9. Close lower valve with left hand whilst holding the radial handle with the right hand, 90º movement of valve handle is away from operator to close.
10.  Remove transfer assembly from container aperture by using two hands on the radial handle and replace container cap.
11.  Repeat operation or return transfer unit to minimum reach position and return rotating arm against the wall.